battery charger

*input: 90VAC-240VAC *output:3VDC 300mA 2/4 AA size 3VDC 150 mA 2/4 AAA size 9VDC 100 mA 1/2 9V size

Item Name : Battery charger

Item NO.:ycd818

*Important safety instructions .

*Supply : 20000pcs/month

Characteristics:  

*charge a lot of times: ycd818 is a friendly charger Able to charge a lot of times so called" non-rechargeable

batteries" because they are usually damaged by heat from classical chargers: alkaline andsaline batteries.

 

 

* intelligent charger incorporating :ycd818 is an intelligent charger incorporating a "real-time detector chip” enabling it to adapt to different kinds of alkaline and saline batteries as well as rechargeable cells

 

(NiCad, Ni-MH).When the batteries are full, ycd818 stops its charging and blinks.

 

 

* fast charging :With ycd818, fast charging is possible with many types of batteries: Alkaline, Saline (from 1 to 3 hours), NiCad, Ni-MH (from 3 to 12 hours). Charging speed depends on the type and quality of batteries and on storage conditions at home.

 

 

 

Application :

 

*two or four AA rechargeable batteries

 

*two or four AAA rechargeable batteries

 

*one or two 9 V batterie

 

 

Charging time:

 

Type of battery	Charging time (hour)
9 V alkaline or rechargeable batteries	1.5h
1.5V alkaline batteries	3 h
1.5V AAA rechargeable batteries	3 h
1.5V AA rechargeable batteries	3 h

 

OPERATION INSTRUCTIO

 

1 . Insert 2 or 4 AA/AAA or 1/2 x 9V DC batteries in the battery compartment (When inserting batteries make sure they are aligned to the correct polarities and touching the metal contacts.)

2. Use the proper plug model or adapter for the country you are in.

3. Look at the red LED: “charging” within a couple of seconds, the red LED becomes

bright. The ycd818 is charging your batteries. Let it charge until the end of charge

green LED blinks(note:For 9V battery ,its green LED always on)

At this time ,the charging circuit automatically gets off .If the green LED blinks at the

beginning ,your batteries have no need to be charged.

 

4. After charging,disconnect the charger from the power source and remove the batteries ,This prevents overcharging the batteries and reduces wear and tear on the  charger.

 

User care: Charge alkaline or rechargeable batteries of the same trademark and of the same type: don't mix "non-rechargeable   and "rechargeable   batteries.

 

 

 

Note: Charge only batteries of the same brand of the same type and size at one time.

 

 

     

 

 

 

 

 

 

 

 

battery charger